|
CI 60S
Function
The cable identification system consists of Pulse Transmitter, Directional Tongs and Pulse Receiver. Saw toothed impulses from the transmitter are fed into the cable to be identified. Identification Tongs applied on the cable receive them as DC impulse and are indicated on the receiver unit. Direction of current of these impulses identify the wanted cable.
The core of the wanted cable is connected to Pulse Transmitter PG 60S. Far end of the core is grounded. Saw toothed pulses from the transmitter travel to the far and on the wanted cable and return through sheaths/armours of all the cables to the sending end.
Use of modulation impulse sequence can be used for confirmation of the impulses received from transmitter only.
Specifications |
